How to Install Your Electric Touch Lighting Fixtures

Introduction
Installing your Electric Touch lighting fixture is a simple process, but it’s essential to follow proper safety precautions. Here's a step-by-step guide to help you install your light fixture correctly.

Step 1: Gather Your Tools
Before beginning the installation, make sure you have all the necessary tools:

• Screwdriver
• Ladder
• Wire strippers (if necessary)
• Voltage tester
• Electrical tape
• Light bulbs

Step 2: Turn Off the Power
Safety first! Before starting the installation, turn off the power at the circuit breaker to avoid any risk of electrical shock.

Step 3: Remove Old Fixture (If Applicable)
If you're replacing an existing fixture, carefully remove it. Make sure the wires are disconnected before fully removing the old fixture. Keep any mounting hardware you might need for the new fixture.

Step 4: Install the New Fixture

1. Attach the mounting bracket to the electrical box in the ceiling.
2. Connect the wires from the fixture to the wires in the ceiling, matching color to color (black to black, white to white, and green or copper for the ground wire).
3. Secure the fixture to the mounting bracket. Tighten all screws to ensure the fixture is stable.

Step 5: Test the Fixture
Once the installation is complete, turn the power back on and test your new lighting. If it works, congratulations! If not, double-check your wiring connections and make sure the fixture is properly secured.